Email:info@zglmachinery.com Jiangsu Yingyou Textile Machinery Co.,Ltd

Jiangsu Yingyou Textile Machinery Co.,Ltd

Stenter Machine for Silk Fabric

1.DESCRIPTION OF MACHINE THE STENTER MACHINE IS USED FOR FIXING THE WIDTH OF FABRIC AND MAKE THE FABRIC DRY. 2.SPECIFICATION OF MACHINE ROLLER AVAILABLE WIDTH:2000MM-3600MM MAX WORKING WIDTH:2550MM MIN WORKING WIDTH:700MM NUMBER OF CHAMBERS:10PCS FABRIC SUITABLE: KNIT FABRICS....

Product Details

1.DESCRIPTION OF MACHINE 

THE STENTER MACHINE IS USED FOR FIXING THE WIDTH OF FABRIC AND MAKE THE FABRIC DRY. 


2.SPECIFICATION OF MACHINE 

ROLLER AVAILABLE WIDTH:2000MM-3600MM

MAX WORKING WIDTH:2550MM

MIN WORKING WIDTH:700MM

NUMBER OF CHAMBERS:10PCS

FABRIC SUITABLE: KNIT FABRICS.

POWER:380V/50HZ/3PH

CONTROL POWER:220V

HEAT RESOURCE: HEATING OIL

WORKING SPEED:6~100M/MIN(CAN ADJUST UPON FABRIC NEEDS)

MAIN TRANSMISSION: AC MOTOR GEAR BOX AND INVERTER CONTROL,30KW

OVERFEED DEVICE: INDEPENDENT MOTOR DRIVING AND CLOSED CIRCUIT OVERFEED SYSTEM.

OVERFEED RATIO -10~100%

MOTOR OF PADDER:INVERTER CONTROL

HEAT RECYCLE FAN: INVERTER CONTROL,

AIR BLAST WAY: UP AND DOWN BLASTING AIR

MOTOR POWER:7.5KW, 7.5KW*2/PER CHAMBER

AIR EXHAUSTING FAN:2.2KW+4KW+7.5KW, INVERTER CONTROL

OUTSIDE PAINTING: SPRAYING PLASTICS


GUIDING ROLLER/GUIDING ROD


FUNCTION:

UPON DIFFERENT TYPE AND DESIGN,FABRIC ENTER AND EXIT CAN BE CONSISTED BY SINGLE OR MANY GUIDING ROLLER AND GUIDING ROD. CURRENT INTRODUCTION CAN BE FOUND IN THE CHART.


GUIDING ROLLER AND GUIDING ROD CAN GET FABRIC FEEDING BY DIFFERENT DIRECTION UPON NEEDS.THE ARRANGEMENT OF GUIDING ROD IS VERY PRECISE;

GUIDING ROLLER IS FIXED INTO BALL BEARINGS WHICH THE MAINTAINENCE REQUIRE IS LOW, WITH FABRIC FEEDING THEN ROLLER MOVES, DO NOT HAVE INDENPENDENT DRIVING DEVICE.


DANGER NOTE:

BEFORE START MAINTAINENCE, SHOULD TURN OFF MAIN POWER AND LOCK IT. BESIDES, MAIN POWER AND CONTROL CARBINET SHOULD PUT ON NOTICE “MAINTAINENCE”.

WHEN USE CLEANING EQUIPMENT AND LIQUID, MUST FOLLOW THE INSTRUCTION AND WARM ON THE PACKAGE.


MAINTAINENCE:

GUIDING ROD:

OBVERSE- INSPECT GUIDINGN ROD IF ANY DAMAGE, MAKE SURE IT’S FIXED ONTO BASE.


CLEAN- USE PROPER CLEANING EQUIPMENT TO CLEAN IT, ESPECIALLY MORE ATTENTION TO FABRIC WASTE ON THE ROTARY PARTS OF MACHINE. CAN’T USE HARD AND SHARP TOOL TO CLEAN TO AVOID DAMAGE SURFACE OF GUIDING ROD.


GUIDING ROLLER:

OBVERSE- INSPECT GUIDING ROLLER IF ANY DAMAGE, MAKE SURE IT’S FIXED INTO BEARINGS.

CLEAN- USE PROPER CLEANING EQUIPMENT TO CLEAN ROLLER. CAN’T USE HARD AND SHARP TOOL TO CLEAN IT ,TO AVOID DAMAGE.


BEARINGS:

LUBRICATION- THE BEARINGS OF GUIDING ROLLER SHOULD BE FULL OF LUBRICATING GREASE.


TRIAL ROTATION- INSPECT BEARINGS’ CONDITION DURING TRIAL ROTATION,

1.jpg


ITEM

 

SPECIFICATION

BRAND

1

OFFTRACKING CONTROLLER

SWA9511

E+L

2

LOADCELL

PD2525

E+L

3

SELVEDGE DETECT SENSOR AND MOTOR
SYSTEM

FR5503…

E+L

4

SELVEDGE UNCURLER

LP0301/LP0
303…

E+L

5

SELVEDGE CUTTER

BT80

E+L

6

SYNCHRONOUS SYSTEM

 

LENZE

7

INVERTER

 

LENZE

8

PLC PLC CONTROL SYSTEM

S7-300

SIEMENS

9

CONTROL MONDULAR

 

SIEMENS

10

ELECTRIC PARTS

 

SIEMENS

11

MAIN OPERATE TOUCHSCREEN

15"

SIEMENS

12

INLET/OUTLET OPERATE
TOUCHSCREEN

7"

SIEMENS

13

SYNCHRONOUS MOTOR AND GEARBOX

 

LENZE

14

FRAME WIDTH ADJUST MOTOR AND
GEARBOX

 

SIEMENS

15

GEARBOX AND MOTOR OF SPREAD
ROLLER

 

SIEMENS

16

CIRCULATION MOTOR

7.5KW

SIEMENS

17

ENCODER FOR FRAME WIDTH ADJUSTMENT

 

BAUMER

18

AIR-CONDITIONER

 

KUTU

19

RAIL

100MM

CHINA BRAND

CHJIOA

20

WEARING STRIP

13*9
(PEEK )

CHINA BRAND

21

HIGH TEMPERATURE GREESE

 

DUPONT

 

22

PNUEMATICAL PARTS
(CYLINDER, VAVLE ETC.)

 

NORGREN/S MC

23

MOTORIZED 3-WAY VALVE

DN65/DN50

RTK
GERMANY

24

STOP VALVES

 

KSB

25

GAS BURNER

 

MAXON


3.APPLICATION OF MACHINE



Hot Tags: stenter machine for silk fabric, China, manufacturers, brands, textile, high quality, advanced
Related Products
Copyright © Jiangsu Yingyou Textile Machinery Co.,Ltd All Rights Reserved.
QR Code